[Unionfs] unionfs, ubuntu, and kernel bug
Paul Albrecht
albrecht at rdi1.com
Tue May 20 16:55:19 EDT 2008
Hi,
I'm hitting a kernel bug using an ubuntu livecd. Specifically, when I
try to upgrade, things mostly work except for the sudo package.
I'm not sure what's unique about this particular package, but dpkg
consistently segment faults when it extracts its contents.
Here's dmesg output:
[ 0.000000] Linux version 2.6.24-16-generic (buildd at palmer) (gcc
version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC
2008 (Ubuntu 2.6.24-16.30-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000
(reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000
(reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003bfc0000 (usable)
[ 0.000000] BIOS-e820: 000000003bfc0000 - 000000003bfce000 (ACPI
data)
[ 0.000000] BIOS-e820: 000000003bfce000 - 000000003c000000 (ACPI
NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000
(reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000
(reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000
(reserved)
[ 0.000000] 63MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000ff780
[ 0.000000] Entering add_active_range(0, 0, 245696) 0 entries of 256
used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 245696
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 245696
[ 0.000000] On node 0 totalpages: 245696
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 127 pages used for memmap
[ 0.000000] HighMem zone: 16193 pages, LIFO batch:3
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F9200 checksum 0
[ 0.000000] ACPI: RSDP 000F9200, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT 3BFC0000, 0038 (r1 011608 RSDT2051 20080116
MSFT 97)
[ 0.000000] ACPI: FACP 3BFC0200, 0084 (r2 011608 FACP2051 20080116
MSFT 97)
[ 0.000000] ACPI: DSDT 3BFC0430, 3ADF (r1 1ADMY 1ADMY000 0
INTL 20051117)
[ 0.000000] ACPI: FACS 3BFCE000, 0040
[ 0.000000] ACPI: APIC 3BFC0390, 0054 (r1 011608 APIC2051 20080116
MSFT 97)
[ 0.000000] ACPI: MCFG 3BFC03F0, 003C (r1 011608 OEMMCFG 20080116
MSFT 97)
[ 0.000000] ACPI: OEMB 3BFCE040, 0071 (r1 011608 OEMB2051 20080116
MSFT 97)
[ 0.000000] ACPI: HPET 3BFC3F10, 0038 (r1 011608 VIA HPET 20080116
MSFT 97)
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:13 APIC version 20
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low
level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x11068201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 40000000 (gap:
3c000000:c2c00000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000
- 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000
- 00000000000e0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000
- 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 243777
[ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz
file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz
quiet splash --
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1196.993 MHz processor.
[ 33.313351] Console: colour VGA+ 80x25
[ 33.313360] console [tty0] enabled
[ 33.314359] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[ 33.315911] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 33.391167] Memory: 962024k/982784k available (2157k kernel code,
20252k reserved, 998k data, 364k init, 65280k highmem)
[ 33.391192] virtual kernel memory layout:
[ 33.391196] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 33.391200] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 33.391204] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 33.391208] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 33.391212] .init : 0xc041b000 - 0xc0476000 ( 364 kB)
[ 33.391216] .data : 0xc031b5a4 - 0xc0414dc4 ( 998 kB)
[ 33.391219] .text : 0xc0100000 - 0xc031b5a4 (2157 kB)
[ 33.391229] Checking if this processor honours the WP bit even in
supervisor mode... Ok.
[ 33.391328] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4,
CPUs=1, Nodes=1
[ 33.391554] hpet clockevent registered
[ 33.471512] Calibrating delay using timer specific routine.. 2395.68
BogoMIPS (lpj=4791367)
[ 33.471565] Security Framework initialized
[ 33.471582] SELinux: Disabled at boot.
[ 33.471631] AppArmor: AppArmor initialized
[ 33.471642] Failure registering capabilities with primary security
module.
[ 33.471663] Mount-cache hash table entries: 512
[ 33.471921] CPU: After generic identify, caps: a7c9bbff 00100000
00000000 00000000 00004181 00000000 00000000 00000000
[ 33.471943] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 33.471951] CPU: L2 Cache: 128K (64 bytes/line)
[ 33.471957] CPU: After all inits, caps: 27c9bbff 00100000 00000000
00000000 00004181 0000ffcc 00000000 00000000
[ 33.471979] Compat vDSO mapped to ffffe000.
[ 33.472012] Checking 'hlt' instruction... OK.
[ 33.488252] SMP alternatives: switching to UP code
[ 33.490954] Freeing SMP alternatives: 11k freed
[ 33.491246] Early unpacking initramfs... done
[ 34.506697] ACPI: Core revision 20070126
[ 34.506834] ACPI: Looking for DSDT in initramfs... error,
file /DSDT.aml not found.
[ 34.511795] CPU0: Centaur VIA Eden Processor 1200MHz stepping 00
[ 34.511848] Total of 1 processors activated (2395.68 BogoMIPS).
[ 34.512041] ENABLING IO-APIC IRQs
[ 34.512251] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 34.658940] Brought up 1 CPUs
[ 34.658995] CPU0 attaching sched-domain:
[ 34.659002] domain 0: span 01
[ 34.659007] groups: 01
[ 34.659421] net_namespace: 64 bytes
[ 34.659440] Booting paravirtualized kernel on bare hardware
[ 34.660536] Time: 20:19:29 Date: 05/20/08
[ 34.660599] NET: Registered protocol family 16
[ 34.660991] EISA bus registered
[ 34.661003] ACPI: bus type pci registered
[ 34.661568] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=2
[ 34.661575] PCI: Using configuration type 1
[ 34.661580] Setting up standard PCI resources
[ 34.681467] ACPI: EC: Look up EC in DSDT
[ 34.692461] ACPI: Interpreter enabled
[ 34.692469] ACPI: (supports S0 S1 S3 S4 S5)
[ 34.692504] ACPI: Using IOAPIC for interrupt routing
[ 34.693038] Error attaching device data
[ 34.708430] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 34.709476] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 34.709868] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 34.710071] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 34.726462] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12
14 15)
[ 34.726716] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12
14 15)
[ 34.727003] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12
14 15) *0, disabled.
[ 34.727248] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12
14 15)
[ 34.727491] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12
14 15) *0, disabled.
[ 34.727735] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12
14 15) *0, disabled.
[ 34.727977] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12
14 15) *0, disabled.
[ 34.728220] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12
14 15) *0, disabled.
[ 34.728500] ACPI Warning (tbutils-0217): Incorrect checksum in table
[OEMB] - 6C, should be 65 [20070126]
[ 34.728520] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 34.728590] pnp: PnP ACPI init
[ 34.728613] ACPI: bus type pnp registered
[ 34.739279] pnp: PnP ACPI: found 15 devices
[ 34.739288] ACPI: ACPI bus type pnp unregistered
[ 34.739299] PnPBIOS: Disabled by ACPI PNP
[ 34.739785] PCI: Using ACPI for IRQ routing
[ 34.739797] PCI: If a device doesn't work, try "pci=routeirq". If it
helps, post a report
[ 34.758811] NET: Registered protocol family 8
[ 34.758817] NET: Registered protocol family 20
[ 34.758890] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 34.758900] hpet0: 3 32-bit timers, 14318180 Hz
[ 34.759985] AppArmor: AppArmor Filesystem Enabled
[ 34.762792] Time: tsc clocksource has been installed.
[ 34.762814] Switched to high resolution mode on CPU 0
[ 34.770815] system 00:08: ioport range 0xa60-0xa61 has been reserved
[ 34.770824] system 00:08: ioport range 0xa00-0xa0f has been reserved
[ 34.770833] system 00:08: ioport range 0xa20-0xa2f has been reserved
[ 34.770841] system 00:08: ioport range 0xa10-0xa1f has been reserved
[ 34.770850] system 00:08: ioport range 0xa30-0xa3f has been reserved
[ 34.770858] system 00:08: ioport range 0xa40-0xa4f has been reserved
[ 34.770866] system 00:08: ioport range 0xa50-0xa5f has been reserved
[ 34.770885] system 00:09: ioport range 0x3e0-0x3e7 has been reserved
[ 34.770893] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
[ 34.770901] system 00:09: ioport range 0x800-0x87f has been reserved
[ 34.770909] system 00:09: ioport range 0x400-0x41f has been reserved
[ 34.770937] system 00:0c: iomem range 0xfec00000-0xfec00fff could not
be reserved
[ 34.770947] system 00:0c: iomem range 0xfee00000-0xfee00fff could not
be reserved
[ 34.770966] system 00:0d: iomem range 0xe0000000-0xefffffff has been
reserved
[ 34.770989] system 00:0e: iomem range 0x0-0x9ffff could not be
reserved
[ 34.770998] system 00:0e: iomem range 0xc0000-0xcffff could not be
reserved
[ 34.771006] system 00:0e: iomem range 0xe0000-0xfffff could not be
reserved
[ 34.771015] system 00:0e: iomem range 0x100000-0x3bffffff could not
be reserved
[ 34.771024] system 00:0e: iomem range 0xfec00000-0xffffffff could not
be reserved
[ 34.801856] PCI: Bridge: 0000:00:01.0
[ 34.801862] IO window: disabled.
[ 34.801871] MEM window: fd000000-feafffff
[ 34.801878] PREFETCH window: c0000000-dfffffff
[ 34.801887] PCI: Bridge: 0000:00:13.0
[ 34.801891] IO window: disabled.
[ 34.801898] MEM window: feb00000-febfffff
[ 34.801904] PREFETCH window: disabled.
[ 34.801939] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 34.801950] PCI: Setting latency timer of device 0000:00:13.0 to 64
[ 34.801986] NET: Registered protocol family 2
[ 34.838875] IP route cache hash table entries: 32768 (order: 5,
131072 bytes)
[ 34.839645] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
[ 34.842043] TCP bind hash table entries: 65536 (order: 7, 524288
bytes)
[ 34.843243] TCP: Hash tables configured (established 131072 bind
65536)
[ 34.843254] TCP reno registered
[ 34.855022] checking if image is initramfs... it is
[ 36.848734] Freeing initrd memory: 7665k freed
[ 36.849810] audit: initializing netlink socket (disabled)
[ 36.849839] audit(1211314771.352:1): initialized
[ 36.850231] highmem bounce pool size: 64 pages
[ 36.854149] VFS: Disk quotas dquot_6.5.1
[ 36.854324] Dquot-cache hash table entries: 1024 (order 0, 4096
bytes)
[ 36.854627] io scheduler noop registered
[ 36.854633] io scheduler anticipatory registered
[ 36.854639] io scheduler deadline registered
[ 36.854667] io scheduler cfq registered (default)
[ 36.854700] PCI: VIA PCI bridge detected. Disabling DAC.
[ 36.854756] Boot video device is 0000:01:00.0
[ 36.855341] isapnp: Scanning for PnP cards...
[ 37.209002] isapnp: No Plug & Play device found
[ 37.272047] Real Time Clock Driver v1.12ac
[ 37.272369] hpet_resources: 0xfed00000 is busy
[ 37.272430] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
sharing enabled
[ 37.272619] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 37.272976] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 37.274204] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 37.274861] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 37.276413] RAMDISK driver initialized: 16 RAM disks of 65536K size
1024 blocksize
[ 37.276567] input: Macintosh mouse button emulation
as /devices/virtual/input/input0
[ 37.276773] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 37.276782] PNP: PS/2 appears to have AUX port disabled, if this is
incorrect please boot with i8042.nopnp
[ 37.276994] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 37.277667] mice: PS/2 mouse device common for all mice
[ 37.277908] EISA: Probing bus 0 at eisa.0
[ 37.277966] EISA: Detected 0 cards.
[ 37.277973] cpuidle: using governor ladder
[ 37.277978] cpuidle: using governor menu
[ 37.278246] NET: Registered protocol family 1
[ 37.278322] Using IPI No-Shortcut mode
[ 37.278388] registered taskstats version 1
[ 37.278626] Magic number: 8:888:346
[ 37.278944] hash matches device tty63
[ 37.279051] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 37.279057] EDD information not available.
[ 37.279758] Freeing unused kernel memory: 364k freed
[ 37.305272] input: AT Translated Set 2 keyboard
as /devices/platform/i8042/serio0/input/input1
[ 39.109907] fuse init (API version 7.9)
[ 41.466741] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 41.466837] 8139cp 0000:00:08.0: This (id 10ec:8139 rev 10) is not an
8139C+ compatible chip
[ 41.466848] 8139cp 0000:00:08.0: Try the "8139too" driver instead.
[ 41.510734] 8139too Fast Ethernet driver 0.9.28
[ 41.510875] ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 16 (level,
low) -> IRQ 16
[ 41.511638] eth0: RealTek RTL8139 at 0xe800, 44:4d:50:04:08:82, IRQ
16
[ 41.511645] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 41.726652] usbcore: registered new interface driver usbfs
[ 41.726710] usbcore: registered new interface driver hub
[ 41.766976] SCSI subsystem initialized
[ 41.814514] usbcore: registered new device driver usb
[ 41.915268] USB Universal Host Controller Interface driver v3.0
[ 41.915462] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level,
low) -> IRQ 17
[ 41.915487] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 41.916380] uhci_hcd 0000:00:10.0: new USB bus registered, assigned
bus number 1
[ 41.916432] uhci_hcd 0000:00:10.0: irq 17, io base 0x0000ec00
[ 41.916743] usb usb1: configuration #1 chosen from 1 choice
[ 41.916795] hub 1-0:1.0: USB hub found
[ 41.916807] hub 1-0:1.0: 2 ports detected
[ 42.002332] libata version 3.00 loaded.
[ 42.018645] ACPI: PCI Interrupt 0000:00:10.4[D] -> GSI 23 (level,
low) -> IRQ 18
[ 42.018679] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 42.018731] ehci_hcd 0000:00:10.4: new USB bus registered, assigned
bus number 2
[ 42.018790] ehci_hcd 0000:00:10.4: debug port 1
[ 42.018813] ehci_hcd 0000:00:10.4: irq 18, io mem 0xfcfff800
[ 42.030337] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver
10 Dec 2004
[ 42.030607] usb usb2: configuration #1 chosen from 1 choice
[ 42.030665] hub 2-0:1.0: USB hub found
[ 42.030680] hub 2-0:1.0: 2 ports detected
[ 42.206555] pata_via 0000:00:0f.0: version 0.3.3
[ 42.242228] scsi0 : pata_via
[ 42.274214] scsi1 : pata_via
[ 42.276983] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00
irq 14
[ 42.276992] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08
irq 15
[ 42.610326] ata2.00: ATA-0: EmbedDisk 2GB, 2.0, max PIO4
[ 42.610338] ata2.00: 3985632 sectors, multi 1: LBA
[ 42.626201] ata2.00: configured for PIO4
[ 42.650203] ata2.00: configured for PIO4
[ 42.650224] ata2: EH complete
[ 42.650477] scsi 1:0:0:0: Direct-Access ATA EmbedDisk 2GB
2.0 PQ: 0 ANSI: 5
[ 42.697937] usb 2-2: new high speed USB device using ehci_hcd and
address 3
[ 42.839984] usb 2-2: configuration #1 chosen from 1 choice
[ 43.077752] usb 1-1: new low speed USB device using uhci_hcd and
address 2
[ 43.254008] usb 1-1: configuration #1 chosen from 1 choice
[ 44.113207] Driver 'sd' needs updating - please use bus_type methods
[ 44.113382] sd 1:0:0:0: [sda] 3985632 512-byte hardware sectors (2041
MB)
[ 44.113408] sd 1:0:0:0: [sda] Write Protect is off
[ 44.113415] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 44.113449] sd 1:0:0:0: [sda] Write cache: disabled, read cache:
enabled, doesn't support DPO or FUA
[ 44.113546] sd 1:0:0:0: [sda] 3985632 512-byte hardware sectors (2041
MB)
[ 44.113566] sd 1:0:0:0: [sda] Write Protect is off
[ 44.113573] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 44.113603] sd 1:0:0:0: [sda] Write cache: disabled, read cache:
enabled, doesn't support DPO or FUA
[ 44.113613] sda: sda1 sda2 sda3
[ 44.116008] sd 1:0:0:0: [sda] Attached SCSI disk
[ 44.142562] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 44.246352] usbcore: registered new interface driver libusual
[ 44.266694] Initializing USB Mass Storage driver...
[ 44.277010] scsi2 : SCSI emulation for USB Mass Storage devices
[ 44.278255] usbcore: registered new interface driver usb-storage
[ 44.278269] USB Mass Storage support registered.
[ 44.278280] usb-storage: device found at 3
[ 44.278285] usb-storage: waiting for device to settle before scanning
[ 44.286379] usbcore: registered new interface driver hiddev
[ 44.301589] input: Microsoft Basic Optical Mouse
as /devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1:1.0/input/input2
[ 44.317096] input,hidraw0: USB HID v1.10 Mouse [Microsoft Basic
Optical Mouse] on usb-0000:00:10.0-1
[ 44.317142] usbcore: registered new interface driver usbhid
[ 44.317154] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c:
v2.6:USB HID core driver
[ 44.832079] kjournald starting. Commit interval 5 seconds
[ 44.832119] EXT3-fs: mounted filesystem with ordered data mode.
[ 44.864301] kjournald starting. Commit interval 5 seconds
[ 44.864329] EXT3-fs: mounted filesystem with ordered data mode.
[ 44.892986] kjournald starting. Commit interval 5 seconds
[ 44.893012] EXT3-fs: mounted filesystem with ordered data mode.
[ 46.153114] kjournald starting. Commit interval 5 seconds
[ 46.153140] EXT3-fs: mounted filesystem with ordered data mode.
[ 46.181905] kjournald starting. Commit interval 5 seconds
[ 46.181935] EXT3-fs: mounted filesystem with ordered data mode.
[ 46.210611] kjournald starting. Commit interval 5 seconds
[ 46.210636] EXT3-fs: mounted filesystem with ordered data mode.
[ 47.470703] kjournald starting. Commit interval 5 seconds
[ 47.470729] EXT3-fs: mounted filesystem with ordered data mode.
[ 47.499840] kjournald starting. Commit interval 5 seconds
[ 47.499870] EXT3-fs: mounted filesystem with ordered data mode.
[ 47.528556] kjournald starting. Commit interval 5 seconds
[ 47.528581] EXT3-fs: mounted filesystem with ordered data mode.
[ 48.788893] kjournald starting. Commit interval 5 seconds
[ 48.788919] EXT3-fs: mounted filesystem with ordered data mode.
[ 48.816756] kjournald starting. Commit interval 5 seconds
[ 48.816782] EXT3-fs: mounted filesystem with ordered data mode.
[ 48.846912] kjournald starting. Commit interval 5 seconds
[ 48.846938] EXT3-fs: mounted filesystem with ordered data mode.
[ 49.274115] usb-storage: device scan complete
[ 49.275358] scsi 2:0:0:0: CD-ROM LITE-ON CD-RW SOHR-5239V
2$0D PQ: 0 ANSI: 0
[ 49.275889] scsi 2:0:0:0: Attached scsi generic sg1 type 5
[ 49.299429] Driver 'sr' needs updating - please use bus_type methods
[ 49.303471] sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda
tray
[ 49.303487] Uniform CD-ROM driver Revision: 3.20
[ 49.303634] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 50.107230] kjournald starting. Commit interval 5 seconds
[ 50.107257] EXT3-fs: mounted filesystem with ordered data mode.
[ 50.135013] kjournald starting. Commit interval 5 seconds
[ 50.135039] EXT3-fs: mounted filesystem with ordered data mode.
[ 50.164922] kjournald starting. Commit interval 5 seconds
[ 50.164948] EXT3-fs: mounted filesystem with ordered data mode.
[ 50.574387] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 50.605876] ISO 9660 Extensions: RRIP_1991A
[ 50.862462] Registering unionfs 1.4
[ 50.862473] unionfs: debugging is not enabled
[ 50.897346] loop: module loaded
[ 51.199349] squashfs: version 3.3 (2007/10/31) Phillip Lougher
[ 120.203236] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 120.306681] shpchp: Standard Hot Plug PCI Controller Driver version:
0.4
[ 120.526107] Linux agpgart interface v0.102
[ 120.770105] agpgart: Detected VIA CX700 chipset
[ 120.833834] agpgart: AGP aperture is 128M @ 0xf0000000
[ 122.811751] input: PC Speaker
as /devices/platform/pcspkr/input/input3
[ 123.651299] input: Power Button (FF) as /devices/virtual/input/input4
[ 123.664091] ACPI: Power Button (FF) [PWRF]
[ 123.664393] input: Sleep Button (CM) as /devices/virtual/input/input5
[ 123.676100] ACPI: Sleep Button (CM) [SLPB]
[ 123.676363] input: Power Button (CM) as /devices/virtual/input/input6
[ 123.688079] ACPI: Power Button (CM) [PWRB]
[ 130.461319] parport_pc 00:07: reported by Plug and Play ACPI
[ 130.461367] parport0: PC-style at 0x378, irq 7 [PCSPP]
[ 131.787478] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 17 (level,
low) -> IRQ 19
[ 131.787544] PCI: Setting latency timer of device 0000:02:01.0 to 64
[ 138.497836] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 140.369688] No dock devices found.
[ 146.640731] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 146.640745] apm: overridden by ACPI.
[ 146.931723] lp0: using parport0 (interrupt-driven).
[ 147.077079] ppdev: user-space parallel port driver
[ 153.173607] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 153.537620] Bluetooth: Core ver 2.11
[ 153.542285] NET: Registered protocol family 31
[ 153.542298] Bluetooth: HCI device and connection manager initialized
[ 153.542308] Bluetooth: HCI socket layer initialized
[ 153.752428] Bluetooth: L2CAP ver 2.9
[ 153.752440] Bluetooth: L2CAP socket layer initialized
[ 153.779926] Bluetooth: RFCOMM socket layer initialized
[ 153.780836] Bluetooth: RFCOMM TTY layer initialized
[ 153.780846] Bluetooth: RFCOMM ver 1.8
[ 156.156659] NET: Registered protocol family 17
[ 160.481839] NET: Registered protocol family 10
[ 160.483207] lo: Disabled Privacy Extensions
[ 161.942031] [drm] Initialized drm 1.1.0 20060810
[ 161.978663] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level,
low) -> IRQ 16
[ 161.979862] [drm] Initialized via 2.11.1 20070202 on minor 0
[ 161.991292] agpgart: Found an AGP 3.5 compliant device at
0000:00:00.0.
[ 161.991339] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x
mode
[ 161.991389] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x
mode
[ 170.583229] eth0: no IPv6 routers present
[ 175.186289] hda-intel: Invalid position buffer, using LPIB read
method instead.
[ 579.372662] kjournald starting. Commit interval 5 seconds
[ 579.431264] EXT3 FS on sda2, internal journal
[ 579.431288] EXT3-fs: mounted filesystem with ordered data mode.
[ 636.403097] kjournald starting. Commit interval 5 seconds
[ 636.462577] EXT3 FS on sda2, internal journal
[ 636.462600] EXT3-fs: mounted filesystem with ordered data mode.
[ 907.281343] ------------[ cut here ]------------
[ 907.281362] kernel BUG at /build/buildd/linux-2.6.24/fs/attr.c:138!
[ 907.281370] invalid opcode: 0000 [#1] SMP
[ 907.281377] Modules linked in: via drm ipv6 af_packet rfcomm l2cap
bluetooth ppdev lp cpufreq_userspace cpufreq_stats cpufreq_powersave
cpufreq_ondemand freq_table cpufreq_conservative video output sbs sbshc
container dock ac iptable_filter ip_tables x_tables snd_hda_intel
snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc snd_hwdep snd_seq_dummy
evdev parport_pc parport snd_seq_oss snd_seq_midi snd_rawmidi
snd_seq_midi_event snd_seq snd_timer snd_seq_device snd soundcore button
pcspkr i2c_viapro i2c_core via_agp agpgart shpchp pci_hotplug battery
squashfs loop unionfs nls_cp437 isofs sr_mod cdrom ext3 jbd mbcache
usbhid hid usb_storage libusual sg sd_mod pata_via pata_acpi ata_generic
ehci_hcd uhci_hcd libata scsi_mod usbcore 8139too 8139cp mii thermal
processor fan fbcon tileblit font bitblit softcursor fuse
[ 907.281504]
[ 907.281512] Pid: 9662, comm: dpkg Not tainted (2.6.24-16-generic #1)
[ 907.281520] EIP: 0060:[<c01a1fab>] EFLAGS: 00010202 CPU: 0
[ 907.281543] EIP is at fnotify_change+0x29b/0x3a0
[ 907.281550] EAX: 483335b9 EBX: d6bd3f10 ECX: 00001847 EDX: 3123d8c0
[ 907.281558] ESI: d69138f8 EDI: 00001847 EBP: d69138f8 ESP: d6bd3e58
[ 907.281565] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[ 907.281574] Process dpkg (pid: 9662, ti=d6bd2000 task=ea77b0e0
task.ti=d6bd2000)
[ 907.281580] Stack: f62d2330 c0196d1b 00000000 d13fef68 d6bd3f5c
e6b289ed 00000001 00000000
[ 907.281596] f0b5a550 00000000 d69138f8 d13fef68 00000000
c01a20bf 00000000 f89d93eb
[ 907.281611] e6b20009 dfa318e0 dfa31880 f79d2dd0 dfa49820
d6bd3f10 d13fe7f8 f62d2330
[ 907.281626] Call Trace:
[ 907.281635] [<c0196d1b>] __link_path_walk+0xaab/0xe10
[ 907.281672] [<c01a20bf>] notify_change+0xf/0x20
[ 907.281687] [<f89d93eb>] unionfs_setattr+0x27b/0x2b0 [unionfs]
[ 907.281741] [<c01a2087>] fnotify_change+0x377/0x3a0
[ 907.281776] [<c018b888>] chown_common+0xd8/0xf0
[ 907.281798] [<c019606a>] getname+0xaa/0xe0
[ 907.281824] [<c018ba4b>] sys_chown+0x4b/0x70
[ 907.281865] [<c0197f1f>] sys_link+0x2f/0x40
[ 907.281886] [<c01043c2>] sysenter_past_esp+0x6b/0xa9
[ 907.281931] =======================
[ 907.281935] Code: 8b 54 24 0c 8b 42 0c 83 e8 80 e8 11 48 17 00 e9 35
fe ff ff 8b 3b 83 cf 01 89 3b 0f b7 45 6a 80 e4 f7 66 89 43 04 e9 e4 fd
ff ff <0f> 0b eb fe 90 81 23 ff bf ff ff 8b 44 24 0c e8 e1 f8 03 00 85
[ 907.282002] EIP: [<c01a1fab>] fnotify_change+0x29b/0x3a0 SS:ESP
0068:d6bd3e58
[ 907.282027] ---[ end trace dd9a5269b00504fc ]---
Any insight into this problem? Anyway to work around it?
--
Paul Albrecht
-------------- next part --------------
[ 0.000000] Linux version 2.6.24-16-generic (buildd at palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008 (Ubuntu 2.6.24-16.30-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003bfc0000 (usable)
[ 0.000000] BIOS-e820: 000000003bfc0000 - 000000003bfce000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003bfce000 - 000000003c000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] 63MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000ff780
[ 0.000000] Entering add_active_range(0, 0, 245696) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 245696
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 245696
[ 0.000000] On node 0 totalpages: 245696
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 127 pages used for memmap
[ 0.000000] HighMem zone: 16193 pages, LIFO batch:3
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F9200 checksum 0
[ 0.000000] ACPI: RSDP 000F9200, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT 3BFC0000, 0038 (r1 011608 RSDT2051 20080116 MSFT 97)
[ 0.000000] ACPI: FACP 3BFC0200, 0084 (r2 011608 FACP2051 20080116 MSFT 97)
[ 0.000000] ACPI: DSDT 3BFC0430, 3ADF (r1 1ADMY 1ADMY000 0 INTL 20051117)
[ 0.000000] ACPI: FACS 3BFCE000, 0040
[ 0.000000] ACPI: APIC 3BFC0390, 0054 (r1 011608 APIC2051 20080116 MSFT 97)
[ 0.000000] ACPI: MCFG 3BFC03F0, 003C (r1 011608 OEMMCFG 20080116 MSFT 97)
[ 0.000000] ACPI: OEMB 3BFCE040, 0071 (r1 011608 OEMB2051 20080116 MSFT 97)
[ 0.000000] ACPI: HPET 3BFC3F10, 0038 (r1 011608 VIA HPET 20080116 MSFT 97)
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:13 APIC version 20
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x11068201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3c000000:c2c00000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243777
[ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash --
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1196.993 MHz processor.
[ 33.313351] Console: colour VGA+ 80x25
[ 33.313360] console [tty0] enabled
[ 33.314359] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 33.315911] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 33.391167] Memory: 962024k/982784k available (2157k kernel code, 20252k reserved, 998k data, 364k init, 65280k highmem)
[ 33.391192] virtual kernel memory layout:
[ 33.391196] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 33.391200] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 33.391204] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 33.391208] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 33.391212] .init : 0xc041b000 - 0xc0476000 ( 364 kB)
[ 33.391216] .data : 0xc031b5a4 - 0xc0414dc4 ( 998 kB)
[ 33.391219] .text : 0xc0100000 - 0xc031b5a4 (2157 kB)
[ 33.391229] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 33.391328] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 33.391554] hpet clockevent registered
[ 33.471512] Calibrating delay using timer specific routine.. 2395.68 BogoMIPS (lpj=4791367)
[ 33.471565] Security Framework initialized
[ 33.471582] SELinux: Disabled at boot.
[ 33.471631] AppArmor: AppArmor initialized
[ 33.471642] Failure registering capabilities with primary security module.
[ 33.471663] Mount-cache hash table entries: 512
[ 33.471921] CPU: After generic identify, caps: a7c9bbff 00100000 00000000 00000000 00004181 00000000 00000000 00000000
[ 33.471943] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 33.471951] CPU: L2 Cache: 128K (64 bytes/line)
[ 33.471957] CPU: After all inits, caps: 27c9bbff 00100000 00000000 00000000 00004181 0000ffcc 00000000 00000000
[ 33.471979] Compat vDSO mapped to ffffe000.
[ 33.472012] Checking 'hlt' instruction... OK.
[ 33.488252] SMP alternatives: switching to UP code
[ 33.490954] Freeing SMP alternatives: 11k freed
[ 33.491246] Early unpacking initramfs... done
[ 34.506697] ACPI: Core revision 20070126
[ 34.506834] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 34.511795] CPU0: Centaur VIA Eden Processor 1200MHz stepping 00
[ 34.511848] Total of 1 processors activated (2395.68 BogoMIPS).
[ 34.512041] ENABLING IO-APIC IRQs
[ 34.512251] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 34.658940] Brought up 1 CPUs
[ 34.658995] CPU0 attaching sched-domain:
[ 34.659002] domain 0: span 01
[ 34.659007] groups: 01
[ 34.659421] net_namespace: 64 bytes
[ 34.659440] Booting paravirtualized kernel on bare hardware
[ 34.660536] Time: 20:19:29 Date: 05/20/08
[ 34.660599] NET: Registered protocol family 16
[ 34.660991] EISA bus registered
[ 34.661003] ACPI: bus type pci registered
[ 34.661568] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=2
[ 34.661575] PCI: Using configuration type 1
[ 34.661580] Setting up standard PCI resources
[ 34.681467] ACPI: EC: Look up EC in DSDT
[ 34.692461] ACPI: Interpreter enabled
[ 34.692469] ACPI: (supports S0 S1 S3 S4 S5)
[ 34.692504] ACPI: Using IOAPIC for interrupt routing
[ 34.693038] Error attaching device data
[ 34.708430] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 34.709476] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 34.709868] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 34.710071] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 34.726462] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 34.726716] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 34.727003] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 34.727248] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 34.727491] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 34.727735] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 34.727977] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 34.728220] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 34.728500] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 6C, should be 65 [20070126]
[ 34.728520] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 34.728590] pnp: PnP ACPI init
[ 34.728613] ACPI: bus type pnp registered
[ 34.739279] pnp: PnP ACPI: found 15 devices
[ 34.739288] ACPI: ACPI bus type pnp unregistered
[ 34.739299] PnPBIOS: Disabled by ACPI PNP
[ 34.739785] PCI: Using ACPI for IRQ routing
[ 34.739797] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 34.758811] NET: Registered protocol family 8
[ 34.758817] NET: Registered protocol family 20
[ 34.758890] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 34.758900] hpet0: 3 32-bit timers, 14318180 Hz
[ 34.759985] AppArmor: AppArmor Filesystem Enabled
[ 34.762792] Time: tsc clocksource has been installed.
[ 34.762814] Switched to high resolution mode on CPU 0
[ 34.770815] system 00:08: ioport range 0xa60-0xa61 has been reserved
[ 34.770824] system 00:08: ioport range 0xa00-0xa0f has been reserved
[ 34.770833] system 00:08: ioport range 0xa20-0xa2f has been reserved
[ 34.770841] system 00:08: ioport range 0xa10-0xa1f has been reserved
[ 34.770850] system 00:08: ioport range 0xa30-0xa3f has been reserved
[ 34.770858] system 00:08: ioport range 0xa40-0xa4f has been reserved
[ 34.770866] system 00:08: ioport range 0xa50-0xa5f has been reserved
[ 34.770885] system 00:09: ioport range 0x3e0-0x3e7 has been reserved
[ 34.770893] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
[ 34.770901] system 00:09: ioport range 0x800-0x87f has been reserved
[ 34.770909] system 00:09: ioport range 0x400-0x41f has been reserved
[ 34.770937] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 34.770947] system 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 34.770966] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
[ 34.770989] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 34.770998] system 00:0e: iomem range 0xc0000-0xcffff could not be reserved
[ 34.771006] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[ 34.771015] system 00:0e: iomem range 0x100000-0x3bffffff could not be reserved
[ 34.771024] system 00:0e: iomem range 0xfec00000-0xffffffff could not be reserved
[ 34.801856] PCI: Bridge: 0000:00:01.0
[ 34.801862] IO window: disabled.
[ 34.801871] MEM window: fd000000-feafffff
[ 34.801878] PREFETCH window: c0000000-dfffffff
[ 34.801887] PCI: Bridge: 0000:00:13.0
[ 34.801891] IO window: disabled.
[ 34.801898] MEM window: feb00000-febfffff
[ 34.801904] PREFETCH window: disabled.
[ 34.801939] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 34.801950] PCI: Setting latency timer of device 0000:00:13.0 to 64
[ 34.801986] NET: Registered protocol family 2
[ 34.838875] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 34.839645] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 34.842043] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 34.843243] TCP: Hash tables configured (established 131072 bind 65536)
[ 34.843254] TCP reno registered
[ 34.855022] checking if image is initramfs... it is
[ 36.848734] Freeing initrd memory: 7665k freed
[ 36.849810] audit: initializing netlink socket (disabled)
[ 36.849839] audit(1211314771.352:1): initialized
[ 36.850231] highmem bounce pool size: 64 pages
[ 36.854149] VFS: Disk quotas dquot_6.5.1
[ 36.854324] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 36.854627] io scheduler noop registered
[ 36.854633] io scheduler anticipatory registered
[ 36.854639] io scheduler deadline registered
[ 36.854667] io scheduler cfq registered (default)
[ 36.854700] PCI: VIA PCI bridge detected. Disabling DAC.
[ 36.854756] Boot video device is 0000:01:00.0
[ 36.855341] isapnp: Scanning for PnP cards...
[ 37.209002] isapnp: No Plug & Play device found
[ 37.272047] Real Time Clock Driver v1.12ac
[ 37.272369] hpet_resources: 0xfed00000 is busy
[ 37.272430] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 37.272619] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 37.272976] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 37.274204] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 37.274861] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 37.276413] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 37.276567] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 37.276773] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 37.276782] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 37.276994] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 37.277667] mice: PS/2 mouse device common for all mice
[ 37.277908] EISA: Probing bus 0 at eisa.0
[ 37.277966] EISA: Detected 0 cards.
[ 37.277973] cpuidle: using governor ladder
[ 37.277978] cpuidle: using governor menu
[ 37.278246] NET: Registered protocol family 1
[ 37.278322] Using IPI No-Shortcut mode
[ 37.278388] registered taskstats version 1
[ 37.278626] Magic number: 8:888:346
[ 37.278944] hash matches device tty63
[ 37.279051] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 37.279057] EDD information not available.
[ 37.279758] Freeing unused kernel memory: 364k freed
[ 37.305272] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 39.109907] fuse init (API version 7.9)
[ 41.466741] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 41.466837] 8139cp 0000:00:08.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[ 41.466848] 8139cp 0000:00:08.0: Try the "8139too" driver instead.
[ 41.510734] 8139too Fast Ethernet driver 0.9.28
[ 41.510875] ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 41.511638] eth0: RealTek RTL8139 at 0xe800, 44:4d:50:04:08:82, IRQ 16
[ 41.511645] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 41.726652] usbcore: registered new interface driver usbfs
[ 41.726710] usbcore: registered new interface driver hub
[ 41.766976] SCSI subsystem initialized
[ 41.814514] usbcore: registered new device driver usb
[ 41.915268] USB Universal Host Controller Interface driver v3.0
[ 41.915462] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 17
[ 41.915487] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 41.916380] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 41.916432] uhci_hcd 0000:00:10.0: irq 17, io base 0x0000ec00
[ 41.916743] usb usb1: configuration #1 chosen from 1 choice
[ 41.916795] hub 1-0:1.0: USB hub found
[ 41.916807] hub 1-0:1.0: 2 ports detected
[ 42.002332] libata version 3.00 loaded.
[ 42.018645] ACPI: PCI Interrupt 0000:00:10.4[D] -> GSI 23 (level, low) -> IRQ 18
[ 42.018679] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 42.018731] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 2
[ 42.018790] ehci_hcd 0000:00:10.4: debug port 1
[ 42.018813] ehci_hcd 0000:00:10.4: irq 18, io mem 0xfcfff800
[ 42.030337] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 42.030607] usb usb2: configuration #1 chosen from 1 choice
[ 42.030665] hub 2-0:1.0: USB hub found
[ 42.030680] hub 2-0:1.0: 2 ports detected
[ 42.206555] pata_via 0000:00:0f.0: version 0.3.3
[ 42.242228] scsi0 : pata_via
[ 42.274214] scsi1 : pata_via
[ 42.276983] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 42.276992] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 42.610326] ata2.00: ATA-0: EmbedDisk 2GB, 2.0, max PIO4
[ 42.610338] ata2.00: 3985632 sectors, multi 1: LBA
[ 42.626201] ata2.00: configured for PIO4
[ 42.650203] ata2.00: configured for PIO4
[ 42.650224] ata2: EH complete
[ 42.650477] scsi 1:0:0:0: Direct-Access ATA EmbedDisk 2GB 2.0 PQ: 0 ANSI: 5
[ 42.697937] usb 2-2: new high speed USB device using ehci_hcd and address 3
[ 42.839984] usb 2-2: configuration #1 chosen from 1 choice
[ 43.077752] usb 1-1: new low speed USB device using uhci_hcd and address 2
[ 43.254008] usb 1-1: configuration #1 chosen from 1 choice
[ 44.113207] Driver 'sd' needs updating - please use bus_type methods
[ 44.113382] sd 1:0:0:0: [sda] 3985632 512-byte hardware sectors (2041 MB)
[ 44.113408] sd 1:0:0:0: [sda] Write Protect is off
[ 44.113415] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 44.113449] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 44.113546] sd 1:0:0:0: [sda] 3985632 512-byte hardware sectors (2041 MB)
[ 44.113566] sd 1:0:0:0: [sda] Write Protect is off
[ 44.113573] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 44.113603] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 44.113613] sda: sda1 sda2 sda3
[ 44.116008] sd 1:0:0:0: [sda] Attached SCSI disk
[ 44.142562] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 44.246352] usbcore: registered new interface driver libusual
[ 44.266694] Initializing USB Mass Storage driver...
[ 44.277010] scsi2 : SCSI emulation for USB Mass Storage devices
[ 44.278255] usbcore: registered new interface driver usb-storage
[ 44.278269] USB Mass Storage support registered.
[ 44.278280] usb-storage: device found at 3
[ 44.278285] usb-storage: waiting for device to settle before scanning
[ 44.286379] usbcore: registered new interface driver hiddev
[ 44.301589] input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1:1.0/input/input2
[ 44.317096] input,hidraw0: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:10.0-1
[ 44.317142] usbcore: registered new interface driver usbhid
[ 44.317154] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 44.832079] kjournald starting. Commit interval 5 seconds
[ 44.832119] EXT3-fs: mounted filesystem with ordered data mode.
[ 44.864301] kjournald starting. Commit interval 5 seconds
[ 44.864329] EXT3-fs: mounted filesystem with ordered data mode.
[ 44.892986] kjournald starting. Commit interval 5 seconds
[ 44.893012] EXT3-fs: mounted filesystem with ordered data mode.
[ 46.153114] kjournald starting. Commit interval 5 seconds
[ 46.153140] EXT3-fs: mounted filesystem with ordered data mode.
[ 46.181905] kjournald starting. Commit interval 5 seconds
[ 46.181935] EXT3-fs: mounted filesystem with ordered data mode.
[ 46.210611] kjournald starting. Commit interval 5 seconds
[ 46.210636] EXT3-fs: mounted filesystem with ordered data mode.
[ 47.470703] kjournald starting. Commit interval 5 seconds
[ 47.470729] EXT3-fs: mounted filesystem with ordered data mode.
[ 47.499840] kjournald starting. Commit interval 5 seconds
[ 47.499870] EXT3-fs: mounted filesystem with ordered data mode.
[ 47.528556] kjournald starting. Commit interval 5 seconds
[ 47.528581] EXT3-fs: mounted filesystem with ordered data mode.
[ 48.788893] kjournald starting. Commit interval 5 seconds
[ 48.788919] EXT3-fs: mounted filesystem with ordered data mode.
[ 48.816756] kjournald starting. Commit interval 5 seconds
[ 48.816782] EXT3-fs: mounted filesystem with ordered data mode.
[ 48.846912] kjournald starting. Commit interval 5 seconds
[ 48.846938] EXT3-fs: mounted filesystem with ordered data mode.
[ 49.274115] usb-storage: device scan complete
[ 49.275358] scsi 2:0:0:0: CD-ROM LITE-ON CD-RW SOHR-5239V 2$0D PQ: 0 ANSI: 0
[ 49.275889] scsi 2:0:0:0: Attached scsi generic sg1 type 5
[ 49.299429] Driver 'sr' needs updating - please use bus_type methods
[ 49.303471] sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray
[ 49.303487] Uniform CD-ROM driver Revision: 3.20
[ 49.303634] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 50.107230] kjournald starting. Commit interval 5 seconds
[ 50.107257] EXT3-fs: mounted filesystem with ordered data mode.
[ 50.135013] kjournald starting. Commit interval 5 seconds
[ 50.135039] EXT3-fs: mounted filesystem with ordered data mode.
[ 50.164922] kjournald starting. Commit interval 5 seconds
[ 50.164948] EXT3-fs: mounted filesystem with ordered data mode.
[ 50.574387] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 50.605876] ISO 9660 Extensions: RRIP_1991A
[ 50.862462] Registering unionfs 1.4
[ 50.862473] unionfs: debugging is not enabled
[ 50.897346] loop: module loaded
[ 51.199349] squashfs: version 3.3 (2007/10/31) Phillip Lougher
[ 120.203236] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 120.306681] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 120.526107] Linux agpgart interface v0.102
[ 120.770105] agpgart: Detected VIA CX700 chipset
[ 120.833834] agpgart: AGP aperture is 128M @ 0xf0000000
[ 122.811751] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 123.651299] input: Power Button (FF) as /devices/virtual/input/input4
[ 123.664091] ACPI: Power Button (FF) [PWRF]
[ 123.664393] input: Sleep Button (CM) as /devices/virtual/input/input5
[ 123.676100] ACPI: Sleep Button (CM) [SLPB]
[ 123.676363] input: Power Button (CM) as /devices/virtual/input/input6
[ 123.688079] ACPI: Power Button (CM) [PWRB]
[ 130.461319] parport_pc 00:07: reported by Plug and Play ACPI
[ 130.461367] parport0: PC-style at 0x378, irq 7 [PCSPP]
[ 131.787478] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 17 (level, low) -> IRQ 19
[ 131.787544] PCI: Setting latency timer of device 0000:02:01.0 to 64
[ 138.497836] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 140.369688] No dock devices found.
[ 146.640731] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 146.640745] apm: overridden by ACPI.
[ 146.931723] lp0: using parport0 (interrupt-driven).
[ 147.077079] ppdev: user-space parallel port driver
[ 153.173607] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 153.537620] Bluetooth: Core ver 2.11
[ 153.542285] NET: Registered protocol family 31
[ 153.542298] Bluetooth: HCI device and connection manager initialized
[ 153.542308] Bluetooth: HCI socket layer initialized
[ 153.752428] Bluetooth: L2CAP ver 2.9
[ 153.752440] Bluetooth: L2CAP socket layer initialized
[ 153.779926] Bluetooth: RFCOMM socket layer initialized
[ 153.780836] Bluetooth: RFCOMM TTY layer initialized
[ 153.780846] Bluetooth: RFCOMM ver 1.8
[ 156.156659] NET: Registered protocol family 17
[ 160.481839] NET: Registered protocol family 10
[ 160.483207] lo: Disabled Privacy Extensions
[ 161.942031] [drm] Initialized drm 1.1.0 20060810
[ 161.978663] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 161.979862] [drm] Initialized via 2.11.1 20070202 on minor 0
[ 161.991292] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[ 161.991339] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 161.991389] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[ 170.583229] eth0: no IPv6 routers present
[ 175.186289] hda-intel: Invalid position buffer, using LPIB read method instead.
[ 579.372662] kjournald starting. Commit interval 5 seconds
[ 579.431264] EXT3 FS on sda2, internal journal
[ 579.431288] EXT3-fs: mounted filesystem with ordered data mode.
[ 636.403097] kjournald starting. Commit interval 5 seconds
[ 636.462577] EXT3 FS on sda2, internal journal
[ 636.462600] EXT3-fs: mounted filesystem with ordered data mode.
[ 907.281343] ------------[ cut here ]------------
[ 907.281362] kernel BUG at /build/buildd/linux-2.6.24/fs/attr.c:138!
[ 907.281370] invalid opcode: 0000 [#1] SMP
[ 907.281377] Modules linked in: via drm ipv6 af_packet rfcomm l2cap bluetooth ppdev lp cpufreq_userspace cpufreq_stats cpufreq_powersave cpufreq_ondemand freq_table cpufreq_conservative video output sbs sbshc container dock ac iptable_filter ip_tables x_tables snd_hda_intel snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc snd_hwdep snd_seq_dummy evdev parport_pc parport snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device snd soundcore button pcspkr i2c_viapro i2c_core via_agp agpgart shpchp pci_hotplug battery squashfs loop unionfs nls_cp437 isofs sr_mod cdrom ext3 jbd mbcache usbhid hid usb_storage libusual sg sd_mod pata_via pata_acpi ata_generic ehci_hcd uhci_hcd libata scsi_mod usbcore 8139too 8139cp mii thermal processor fan fbcon tileblit font bitblit softcursor fuse
[ 907.281504]
[ 907.281512] Pid: 9662, comm: dpkg Not tainted (2.6.24-16-generic #1)
[ 907.281520] EIP: 0060:[<c01a1fab>] EFLAGS: 00010202 CPU: 0
[ 907.281543] EIP is at fnotify_change+0x29b/0x3a0
[ 907.281550] EAX: 483335b9 EBX: d6bd3f10 ECX: 00001847 EDX: 3123d8c0
[ 907.281558] ESI: d69138f8 EDI: 00001847 EBP: d69138f8 ESP: d6bd3e58
[ 907.281565] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[ 907.281574] Process dpkg (pid: 9662, ti=d6bd2000 task=ea77b0e0 task.ti=d6bd2000)
[ 907.281580] Stack: f62d2330 c0196d1b 00000000 d13fef68 d6bd3f5c e6b289ed 00000001 00000000
[ 907.281596] f0b5a550 00000000 d69138f8 d13fef68 00000000 c01a20bf 00000000 f89d93eb
[ 907.281611] e6b20009 dfa318e0 dfa31880 f79d2dd0 dfa49820 d6bd3f10 d13fe7f8 f62d2330
[ 907.281626] Call Trace:
[ 907.281635] [<c0196d1b>] __link_path_walk+0xaab/0xe10
[ 907.281672] [<c01a20bf>] notify_change+0xf/0x20
[ 907.281687] [<f89d93eb>] unionfs_setattr+0x27b/0x2b0 [unionfs]
[ 907.281741] [<c01a2087>] fnotify_change+0x377/0x3a0
[ 907.281776] [<c018b888>] chown_common+0xd8/0xf0
[ 907.281798] [<c019606a>] getname+0xaa/0xe0
[ 907.281824] [<c018ba4b>] sys_chown+0x4b/0x70
[ 907.281865] [<c0197f1f>] sys_link+0x2f/0x40
[ 907.281886] [<c01043c2>] sysenter_past_esp+0x6b/0xa9
[ 907.281931] =======================
[ 907.281935] Code: 8b 54 24 0c 8b 42 0c 83 e8 80 e8 11 48 17 00 e9 35 fe ff ff 8b 3b 83 cf 01 89 3b 0f b7 45 6a 80 e4 f7 66 89 43 04 e9 e4 fd ff ff <0f> 0b eb fe 90 81 23 ff bf ff ff 8b 44 24 0c e8 e1 f8 03 00 85
[ 907.282002] EIP: [<c01a1fab>] fnotify_change+0x29b/0x3a0 SS:ESP 0068:d6bd3e58
[ 907.282027] ---[ end trace dd9a5269b00504fc ]---
More information about the unionfs
mailing list